Notify me when the price drops
We will email you if we find a lower price on this product!
Additional Information:
Number of Channels: 4
Max Dynamic Output: 4 x 300 Watts RMS 2 Ohm
4x 225 Watts RMS Power at 2 Ohm 12.6 Volts
4x 140 Watts RMS Power at 4 Ohm 12.6 Volts
Bridged 2x 450 Watts RMS Power at 4 Ohm 12.6 Volts
Supply Voltage: 11 ~ 16V
Frequency Response: 20Hz ~ 26KHz
Crossover Low Pass: Fixed at 90Hz
Crossover High Pass: Fixed at 90Hz
Signal to Noise: > 90 dB
Harmonic Distortion: < 0.9 % THD
Input Sensitivity: 0.2 V
Input Impedance: 14K Ohm
Impedance Output: 2 Ohm
Consumption with Signal Musical: 4A ~ 50A
Dimensions (L x W x H): 8.11” x 8.11” x 2.60”
Weight: 3.75 Lbs
TPT-BUNDLE65BULLET - 2x 6.5 TPT-MR6-4 Bullet + 2x Super Tweeters TPT-ST2 CHROME
TPT-MR6-4 BULLET
Engineered to be efficient without sacrificing power or performance, this driver utilizes an extremely efficient ferrite motor and high temperature voice coil, bringing to you a suitable option to upgrade your system to a high level of performance and SPL output at a reasonable price
Specs:
500 Watts Max Power each
150 Watts RMS Power each
Impedance: 4 Ohm each
Sensitivity: 94 dB
Frequency Response: 160 – 9,500 Hz
Voice Coil: 1.5”
Shallow Steel Basket with High Strength Ferrite Magnet
Recommended High Pass Filter with TPT-SP4BT DSP:
180 Hz under 250 Watts of Amplifier RMS Power with 18dB Slope
140 Hz under 150 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting Depth: 2.20”
Mounting Cutout Diameter: 5.75″
Overall Diameter: 6.56″
Weight: 3.40 Lbs
TPT-ST2 CHROME
Engineered and designed in the USA by PRV Audio Group, the TPT-ST2 are car audio high compression bullet tweeters. Ready to deliver major concert sound to your sound system
• BUILT IN CROSSOVER: A capacitor that eliminates out all low end frequencies that might otherwise harm the super tweeters
Specs:
600 Watts Max Power per pair / 300 Watts each
200 Watts RMS Power per pair / 100 Watts each
Impedance: 4 Ohm each tweeter
Sensitivity: 105 dB
Frequency Response: 2,000 – 23,000Hz
Aluminum Diaphragm with a 1″ voice coil
Recommended High Pass Filter on TPT-SP4BT DSP, Based on Power per Tweeter
7500 Hz under 150 Watts of Amplifier RMS Power with 18dB Slope
6000 Hz under 100 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting Depth: 1.39”
Mounting Cutout Diameter: 2.87″ + Terminals
Overall Size: 3.85′ diameter x 1.75″ Height
Weight: 1.32 Lbs each tweeter
Accessories Included:
3x Mounting Screws
Capacitor attached per tweeter
1x Timpano Logo Sticker